6. Insert screen washer into swivel adapter. Attach to
outdoor hose.
HEIGHT ADJUSTMENT
(a) Loosen the height adjustment knob
(counter-clockwise), (b) adjust the height
to the desired position and (c) tighten the
knob (clockwise).
IMPORTANT INFORMATION
THIS FAN IS INTENDED FOR
OUTDOOR USE BUT MAY BE USED
INDOORS WITHOUT THE MISTING
FEATURE
.
Place the fan on a level surface near an
electrical outlet. Place the fan out of the
reach of children. Do not insert anything
into the grill. If moving the fan to a
different location, switch it off and unplug
it from the socket.
OPERATING INSTRUCTIONS
1. Place the fan on a level surface.
2. Plug the GFCI plug into a
standard 120volt AC wall outlet
with ground.
3. To operate, push the control
button corresponding to the
desired speed.
OFF, LOW, MED, HIGH
6
4. Oscillation: Press the knob down to make the fan oscillate
or pull the knob up to stop oscillation
NOTE: THE ANGLE OF THE FAN HEAD IS NOT
ADJUSTABLE.
MISTING
Attach the 3/4” Hose adapter to any 3/4” (standard) garden
hose or spigot. Misting must be turned on/off from the water
source.
DO NOT USE INDOORS WITH
MISTING FEATURE!
CLEANING CLOGGED NOZZLES
Turn the system off and gently tap the nozzle with the head of
a screwdriver to loosen any sediment that may have
accumulated. If tapping does not clear the nozzle, unscrew it
from the misting line for further cleaning.
Place nozzles in a container of vinegar or a household lime
and scale remover (such as Lime-away™) for approximately
30 minutes. Make sure to stir or shake the solution every few
minutes to help loosen debris. Heavier deposits may require
longer soaking and/or additional scrubbing of the nozzles with
a stiff non-metallic brush.
After soaking, shake the nozzles. You should hear a rattling
sound. If none is heard, gently tap the nozzles against a solid
surface to loosen any obstruction. If this doesn’t clear the
nozzles, they should be replaced (MC101). Check your
packaging for extra nozzles, or call WindChaser Products, Inc.
to purchase replacement nozzles.
IMPORTANT
– Never attempt to clear nozzles with pins, nails
or other metal objects as this can damage the misting orifice.
(15 paginas)
(2 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales