Amcor System QT 120 Manual de instrucciones descargar pdf (Pagina 4)

ASSEMBLY INSTRUCTIONS

Important: Assemble the fan before plugging it in.

1. Screw threaded outer pole into

threaded base; Hand tighten until

firmly secured; use no tools.

2. Loosen the set screw on the

back of the control box and set

the control box onto the

assembled outer pole from

Step 1. Then tighten the set

screw. When adjusting the

inner tube, always keep the

water proof cover matched with

the height adjustment knob.

3. Unscrew the guard lock nut by

turning it counter-clockwise.

Mount the rear grill (with the

handle in the upright position) to

the motor housing by matching

its 3 holes to the 3 round pins

on the front motor housing.

Then screw the little set screw

to lock the rear grill and the front

motor housing. Reinstall and

tighten the guard lock nut.

4

1. Insert the motor shaft

spindle into the fan blade by

matching the motor shaft

spindle to the D-shaped cut-

out on fan blade. Secure the

blade by screwing the blade

cap counter-clockwise onto

the shaft.

2. Attach the fan shroud to the rear

grill using provided screws and clips.

The screws and clips are located

in

the shroud. You will notice these

screws and clips are inserted all the

way around the inner rim of the

shroud. Underneath the clips there

are plastic protrusions.

The rear grill sits in between the clip

and the plastic protrusion. Loosen

the screws and “shimmy” the shroud

onto the grill from the bottom. Some

screws and clips may have to be

removed in order to slide the shroud

on; however, do not take all of them

out because it is hard to put them

back into the shroud. Tighten the

screws to secure the shroud to the

rear grill.

5

1 2 3 4 5 6

Comentarios a estos manuales

Sin comentarios